Product ID:40/60 ACID CORE
MSDS Date:05/08/1992
FSC:3439
NIIN:00D007450
MSDS Number: CHQBN

ALPHA METALS,INC.

600 ROUTE 440
JERSEY CITY, NJ 07304
US

Emergency Phone: 201-434-6778(CHEMTREC 800-424-9300)

Info Phone: 201-434-6778

Cage: EO354

NAPA

UNKNOW JERSEY CITY, NJ 07304 US

Telephone: 201-434-6778

Cage: 0NBN5

LEAD (SARA 313) (CERCLA)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.05MG/M3, A3; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9596

AMMONIUM CHLORIDE (CERCLA)

CAS: 12125-02-9

RTECS: BP4550000

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3 FUME; 9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ACID CORE WIRE

LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT A HAZARD AS SHIPPED/STORED. HAZARD
OCCURS WHEN PRODUCT USED IN SOLDERING. SKIN CONTACT WITH HOT METAL
MAY CAUSE BURNS. EXCESSIVE INHALATION OF SOLDERING FUMES MAY CAUSE
ANEMIA, INSOMNIA, WEAKNESS, CONSTIPATION, NAUSEA, ABDOMINAL PAIN.
PROLONGED OVEREXPOSURE MAY RESULT IN KIDNEY DAMAGE AND NERVOUS
SYSTEM INVOLVEMENT
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SKIN BURNS, IRRITATION, EYE IRRITATION, ANEMIA,
INSOMNIA, WEAKNESS, CONSTIPATION, NAUSEA, ABDOMINAL PAIN, KIDNEY
DAMAGE, NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:DISEASES OF THE BLOOD AND
BLOOD-FORMING ORGANS, KIDNEYS, NERVOUS AND POSSIBLY REPRODUCTIVE
SYSTEMS.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. IF OCCURS,
KEEP HEAD BELOW HIPS. GET MEDICAL ATTENTION.

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE EXTINGUISHING MEDIA SUITABLE FOR
SURROUNDING FIRE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
EMITS HIGHLY TOXIC FUMES.

Spill Release Procedures:AVOID INHALATION OF SOLDER FUMES OR DUST.
VACUUMING IS RECOMMENDED. DO NOT USE DRY SWEEPING OR COMPRESSED AIR
CLEANING SYSTEMS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:FOOD AND DRINK SHOULD NOT BE CONSUMED
OR TOBACCO PRODUCTS USED, NOT COSMETICS APPLIED IN AREAS WHERE
SOLDER MAY BE USED. ALWAYS WASH HANDS.
Other Precautions:SINCE EMPTY CONTAINERS MAY RETAIN RESIDUES, ALL
LABELED HAZARD PRECAUTIONS MUST BE OBSERVED. FOR INDUSTRIAL USE
ONLY. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.

Respiratory Protection:A NIOSH APPROVED DUST/FUME RESPIRATOR SHOULD BE
WORN WHERE APPLICABLE LIMITS MAY BE EXCEEDED.
Ventilation:EXHAUST VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATIONS BELOW RESPECTIVE TLV'S.
Protective Gloves:RECOMMENDED TO REDUCE BURN EXPOSURE.
Eye Protection:CHEMICAL GOGGLES, SAFETY GLASSES W/SIDES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Viscosity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GRAY WIRE, NO ODOR, VARIOUS SHAPES AND SIZES
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THE SMOKE FROM A SOLDERING OPERATION
USING THIS PRODUCT MAY CONTAIN A TRACE OF AMMONIA.

Waste Disposal Methods:SCRAP OR SOLID WASTE SHOULD BE RECYCLED OR
STORED IN SEALED DRY CONTAINERS FOR LATER DISPOSAL. DISPOSAL SHOULD
BE IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.